For the best price in town call our: Stoke Office: 01782 215419 |or our Derby Office: 01332 417071
A& R Fencing has developed the heavy duty ‘Dulok Rebound’ panel, to complement the existing ‘Dulok’ system, for use in multi-use games areas, where previously plywood boards, prison mesh, or even heavy duty grating have been used.
The normal ‘Rebound’ panel is 2.03 m high with horizontal wires at 66.5 mm centre to 1200 mm high and then 200 mm centres for the remaining 800 mm. Panels of 1.23 m, 2.03 m with all horizontals at 66.5 mm are available for goal areas and dividing fences.
Dulok Sports Court Fencing For the Dulok Double Wire panel system A& R Fencing has developed a post and clamp bar system which provides a simple method of securing. Complete with an anti-vandal fastener, installed with either a battery-powered driver or traditional tools, this system offers a rapid and secure installation.
The RHS posts are supplied complete with a full-length 40 x 5 mm flat clamp bar and M8 x 40 mm pin hex dome-head security screws or Sheardrive bolts.
All posts and clamps are supplied hot dip galvanised only or hot dip galvanised and polyester powder-coated in colours to match the fencing panels.
Posts: 80 x 40 x 3 mm RHS (up to 3.66 m high)
Posts: 100 x 50 x 3 mm RHS (up to 4.46 m high)
Posts: 120 x 60 x 3.5 mm RHS (up to 6.09 m high)
Flat clamp bars: 40 x 5 mm
Post centres: 2520 mm
The ‘Flexi-rail’ system is fully adaptable meaning no stepping is required as the panels self-rake to follow ground contours.
A full range of standard size gates are available to match any of the railing types, with a range of locking systems and self-closers if required. Gates can also be powder coated in a contrasting colour to meet DDA and access regulations.
Available in standard vertical bar, (range of tops available), standard bow top railings and ROSPA approved ‘play safe’ bow top.
We pride ourselves on giving unbeatable value & service to all of our customers old and new, no matter how big or small the job or requirement is. So, give us a call for FREE Quotation on any of our services.
Safety is of paramount importance to us, and is a requirement by law. Our electricians are Part-P qualified, all our engineers are fully trained to ensure your electric gates meet stringent safety standards and machinery directives.
We always recommend the installation of mechanical sensitive edges and 'magic eye' style safety sensors to ensure your system is as safe as possible. We may also recommend using 24 volt supplies instead of mains and utilising proximity sensors and cut-offs.





